Bass Driver
About
Multiband Overdrive Bass Amplifier"
Nembrini Audio Bass Driver is a 3 band overdrive / amp sim based on the SansAmp Bass Driver DI*, featuring parametric
crossovers to heavily sculpt your bass guitar tone and achieve a modern balance and texture.
Plugins in trial mode provide 35 seconds of active performance, followed by a 5-second silent interval.
Controls (46)
| Control | Type | Range or choices | Default |
|---|---|---|---|
| Output Level | Knob | -120 to 12 dB | -7.7 dB |
| Crossover Low | Knob | 20 to 300 Hz | 220 Hz |
| Crossover High | Knob | 400 Hz to 4 kHz | 4 kHz |
| Gain Low | Knob | 0 to 10 | 3.6 |
| Comp Low | Knob | 0 to 10 | 3.4 |
| Blend Low | Knob | 0 to 100 % | 100 % |
| Level Low | Knob | -120 to 12 dB | -1.4 dB |
| Gain Mid | Knob | 0 to 10 | 6.1 |
| Comp Mid | Knob | 0 to 10 | 2 |
| Blend Mid | Knob | 0 to 100 % | 100 % |
| Level Mid | Knob | -120 to 12 dB | -2.6 dB |
| Gain High | Knob | 0 to 10 | 4.7 |
| Comp High | Knob | 0 to 10 | 6.7 |
| Blend High | Knob | 0 to 100 % | 57 % |
| Level High | Knob | -120 to 12 dB | 0.1 dB |
| Bass | Knob | -10 to 10 dB | 5.6 dB |
| Bass Freq | Knob | 30 to 240 Hz | 40 Hz |
| Mid | Knob | -10 to 10 dB | 4.2 dB |
| Mid Freq | Knob | 160 Hz to 2.2 kHz | 880 Hz |
| Treble | Knob | -10 to 10 dB | 6.9 dB |
| Treble Freq | Knob | 1.8 to 5 kHz | 3.66 kHz |
| Presence | Knob | 0 to 10 | 6.1 |
| Eq 33 Hz | Knob | -12 to 12 dB | 0 dB |
| Eq 80 Hz | Knob | -12 to 12 dB | 0 dB |
| Eq 150 Hz | Knob | -12 to 12 dB | 0.1 dB |
| Eq 300 Hz | Knob | -12 to 12 dB | -1.5 dB |
| Eq 600 Hz | Knob | -12 to 12 dB | 1.5 dB |
| Eq 900 Hz | Knob | -12 to 12 dB | 1.8 dB |
| Eq 2k Hz | Knob | -12 to 12 dB | 1.9 dB |
| Eq 5k Hz | Knob | -12 to 12 dB | 1.3 dB |
| Eq 8k Hz | Knob | -12 to 12 dB | 0 dB |
| Master | Knob | 0 to 10 | 4.7 |
| Cabinet Mode | Choice | Cabinet · Bypass | Cabinet |
| Cabinet Type | Choice | SVT 8x10 · SVT 4x10 · B15 1x15 · HRTK 4x10 TW5 | SVT 4x10 |
| Mic Type | Choice | DYNAMIC D12 · CARDIOID RE20 · CONDENSER NU47 · DYNAMIC MD421 | CONDENSER NU47 |
| Mic Position | Knob | 0 to 10 | 4.1 |
| Mic Distance | Knob | 0 to 12 | 2 |
| Tweeter Position | Knob | 0 to 10 | 1.7 |
| Tweeter Distance | Knob | 0 to 12 | 4.1 |
| Mic Gain | Knob | -120 to 12 dB | -21.9 dB |
| Tweeter Gain | Knob | -120 to 12 dB | 3.4 dB |
| DI Mode | Choice | PRE · POST | POST |
| DIOut Low Cut | Knob | 10 Hz to 2 kHz | 515 Hz |
| DIOut Tone | Knob | -12 to 12 dB | 5 dB |
| DIOut High Cut | Knob | 120 Hz to 22 kHz | 10.61 kHz |
| DIOut Gain | Knob | -120 to 12 dB | -12 dB |
Control names, ranges and defaults are as the block reports them, read from an Anagram on firmware v1.19.2.24 on Nov 13, 2026.
Presets using this block (1)
See them all →- Hemigorgon Grit by eeek303 · 4 downloads · sounds like “Dogman” by King's X
Community Reviews
✍️ Join free to write a reviewThis block is the better version of Atomic Sans. Nembrini offers this same plugin for PCs, which I also own but actually don't use that often. I love it way more in the Anagram. It doesn't make sense to me why it sounds better in the Anagram than on my PC, but it does.
Be warned though, this block has basically all the same parameters as the plugin version, which is a TON. I think there are about eight pages of parameters to scroll through.
