Mammoth
About
PRECISION BASS PROCESSING. MIX-READY RESULTS.
Mammoth is a modern bass processor built around a multi-stage parallel signal path designed to deliver maximum punch, clarity, and articulation without sacrificing low-end weight. By independently processing low and high frequencies, Mammoth preserves the fundamental while allowing the upper spectrum to be shaped with anything from subtle warmth to aggressive distortion.
Every stage has been tuned to work as a complete recording chain, producing a bass tone that naturally sits in dense modern mixes with minimal post-processing.
⸻
PARALLEL MULTI-BAND ARCHITECTURE
The incoming signal is split using a continuously variable crossover, allowing the low and high frequency bands to be processed independently.
The low band can be reinforced with dedicated low-frequency enhancement and saturation, while the high band passes through Aurora DSP's amp and cabinet processing for controlled harmonic content, attack, and definition. The processed bands are then recombined into a cohesive, phase-accurate output.
This architecture delivers tight transient response, controlled dynamics, and exceptional note separation—even under high-gain conditions.
⸻
TL;DR
- 4 dedicated bass amp models
- Variable crossover for independent low/high processing
- Parallel signal path for maximum clarity and low-end preservation
- Dedicated Bass Maximizer & Low-End Saturator
- Precision EQ voiced specifically for bass guitar
- Integrated cabinet simulation with Aurora DSP impulse responses
- Built-in limiter for controlled output and consistent levels
- Optimized for modern rock and metal bass production
- Same audio engine as the desktop version
Controls (19)
| Control | Type | Range or choices | Default |
|---|---|---|---|
| Input Gain | Knob | -20 to 20 | 0 |
| Split Frequency | Knob | 20 to 800 | 200 |
| Treble Gain | Knob | 0 to 20 | 1 |
| Hot On/Off | Switch | Off · On | Off |
| Melt On/Off | Switch | Off · On | Off |
| Brute On/Off | Switch | Off · On | Off |
| Drive model | Choice | Preamp1 · Preamp2 · Preamp3 · Preamp4 | Preamp1 |
| IR | Choice | 610 · 412 · 810 · OFF | 412 |
| Tone Low | Knob | -8 to 8 | 0 |
| Tone Mid | Knob | -8 to 8 | 0 |
| Tone High | Knob | -8 to 8 | 0 |
| Mammoth Gain | Knob | 0 to 10 | 1 |
| Drive Mix | Knob | 0 to 100 | 100 |
| Bass Gain | Knob | 0 to 10 | 0 |
| Bass Growl | Knob | 0 to 10 | 0 |
| Blend | Knob | 0 to 100 | 50 |
| Slam Amount | Knob | -24 to 0 | 0 |
| Output Level | Knob | -48 to 0 | 0 |
| Gate Threshold | Knob | -100 to 0 | -100 |
Control names, ranges and defaults are as the block reports them, read from an Anagram on firmware v1.19.2.24 on Nov 13, 2026.
Introduction & Training Videos
ⓘ Aurora DSP doesn't respond to reviews, discussions or feature requests here yet. Players still read them. Know someone at Aurora DSP? Point them here →
Community Reviews
✍️ Join free to write a reviewThis block.... no words... unfortunately I have not been able to buy it yet, I have had to make some investments in my (hybrid) pedalboard, to precisely get the most out of the Anagram.
Definitely, with the tests I have done, it is one of the options to have an aggressive and in your face tone, that the Marketplace offers, it is definitely a monster, and it is necessary to have discretion to use it I think, because although sometimes we love to feel the bass down to the depths of the bones... too much can be no longer assimilated for the majority.
I hope to be able to use it freely very soon... I think it is in the upper price range on the Marketplace, I am not critical of its price, because I think that by buying it and using it normally, there will be no disappointments.
This block does add tons of presence, punch, distortion and punch to the bass, congratulations to the developers.
Of the few that I feel that the 5 stars fell short, I would at least give it 6, heh.
