Bass Hammer
About
Advanced Tone Sculpting Bass Amplifier
The Nembrini Bass Hammer plugin, modelled on the Aguilar Tone Hammer*, is engineered for advanced bass tone shaping, featuring Adaptive Gain Sculpting, comprehensive EQ adjustments, and versatile cabinet simulations.
Plugins in trial mode provide 35 seconds of active performance, followed by a 5-second silent interval.
Controls (32)
| Control | Type | Range or choices | Default |
|---|---|---|---|
| Output Level | Knob | -120 to 12 dB | -4.6 dB |
| Input Pad | Switch | Off · On | Off |
| Comp | Knob | 0 to 10 | 7.4 |
| Gain | Knob | 0 to 10 | 6.4 |
| Drive | Knob | 0 to 10 | 4.4 |
| AGS | Switch | Off · On | Off |
| Mid Level | Knob | 0 to 10 | 3.3 |
| Mid Freq | Knob | 0 to 10 | 1.9 |
| Bass | Knob | 0 to 10 | 7.5 |
| Treble | Knob | 0 to 10 | 7 |
| Blend | Knob | 0 to 100 % | 100 % |
| Master | Knob | 0 to 10 | 3.2 |
| Eq 125 Hz | Knob | -12 to 12 dB | -1.7 dB |
| Eq 250 Hz | Knob | -12 to 12 dB | -3.9 dB |
| Eq 500 Hz | Knob | -12 to 12 dB | -3.4 dB |
| Eq 1K Hz | Knob | -12 to 12 dB | -6.5 dB |
| Eq 2K Hz | Knob | -12 to 12 dB | -2.3 dB |
| Eq 4K Hz | Knob | -12 to 12 dB | 4.1 dB |
| Cabinet Mode | Choice | Cabinet · Bypass | Cabinet |
| Cabinet Type | Choice | SVT 8x10 · SVT 4x10 · B15 1x15 · HRTK 4x10 TW5 | SVT 4x10 |
| Mic Type | Choice | DYNAMIC D12 · CARDIOID RE20 · CONDENSER NU47 · DYNAMIC MD421 | CONDENSER NU47 |
| Mic Position | Knob | 0 to 10 | 2.1 |
| Mic Distance | Knob | 0 to 12 | 5.2 |
| Tweeter Position | Knob | 0 to 10 | 2.4 |
| Tweeter Distance | Knob | 0 to 12 | 3.3 |
| Mic Gain | Knob | -120 to 12 dB | -11.8 dB |
| Tweeter Gain | Knob | -120 to 12 dB | -3.3 dB |
| DI Mode | Choice | PRE · POST | POST |
| DI Low Cut | Knob | 10 Hz to 2 kHz | 1.35 kHz |
| DI Tone | Knob | -12 to 12 dB | 1.9 dB |
| DI High Cut | Knob | 120 Hz to 22 kHz | 10.51 kHz |
| DI Gain | Knob | -120 to 12 dB | 6 dB |
Control names, ranges and defaults are as the block reports them, read from an Anagram on firmware v1.19.2.24 on Nov 13, 2026.
Introduction & Training Videos
Community Reviews
✍️ Join free to write a reviewComing from a Tone Hammer 500 amp, this block sounds very familiar (no personal experience with the TH DI it's based on though). Standard settings of this block give a good starting point for a great tone.
This block combines so many features that I previously used multiple blocks for (EQ included, cab IR included, drive/gain included with AGS) and so it frees up at least 2 or 3 spaces.
Only thing lacking for me is more control over the compression.
