Bass 3500
€29.99
Buy on Marketplace →
Buying it? Join free to track your blocks, get update alerts, and help rank the most popular blocks.
★★★★★
Based on: Hartke HA3500
ⓘ
About
🤖 AI summary An emulation of the Hartke HA3500 hybrid bass amplifier, which pairs tube and solid-state preamp stages that you can blend independently. It also has a built-in compressor with an activity LED, a ten-band graphic EQ (±15 dB, 30 Hz to 8 kHz), and broad contour controls around 100 Hz and 10 kHz. The cabinet and recording section offers four cab emulations, four mic models, adjustable mic position, tweeter controls, and parallel D.I. processing.
"The unmistakable punch, definition, and flexibility of a legendary hybrid bass amplifier"
Modeled after the legendary Hartke HA3500* bass amplifier
Nembrini Audio Bass 3500 captures the powerful low end, fast transient response, and distinctive hybrid preamplifier design of the original amplifier.
Key Features
- Hybrid Preamp: Independently blend Tube and Solid State stages to combine harmonic warmth, clarity, definition, and punch.
- Built-In Compressor: Controls peaks, evens out dynamics, and adds weight and consistency to the bass signal. The activity LED provides visual feedback for compression and limiting.
- Ten-Band Graphic Equalizer: Provides ±15 dB adjustment at 30 Hz, 64 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 3 kHz, 5 kHz, and 8 kHz.
- Contour Controls: Broad Low Pass and High Pass controls shape the low-frequency region around 100 Hz and the upper-frequency region around 10 kHz.
-
Cabinet and Recording Chain: Four bass cabinet emulations, four microphone models, adjustable microphone positioning, tweeter controls, parallel D.I. processing.
Controls (32)
| Control | Type | Range or choices | Default |
|---|---|---|---|
| Output Level | Knob | -120 to 12 dB | 0 dB |
| Tube | Knob | 0 to 10 | 3.4 |
| Solid State | Knob | 0 to 10 | 5.1 |
| Compression | Knob | 0 to 10 | 2.2 |
| EQ Enable | Switch | Off · On | On |
| Eq 30 Hz | Knob | -15 to 15 dB | 0 dB |
| Eq 64 Hz | Knob | -15 to 15 dB | 0 dB |
| Eq 125 Hz | Knob | -15 to 15 dB | 0 dB |
| Eq 250 Hz | Knob | -15 to 15 dB | 0 dB |
| Eq 500 Hz | Knob | -15 to 15 dB | 0 dB |
| Eq 1 kHz | Knob | -15 to 15 dB | 0 dB |
| Eq 2 kHz | Knob | -15 to 15 dB | 0 dB |
| Eq 3 kHz | Knob | -15 to 15 dB | 0 dB |
| Eq 5 kHz | Knob | -15 to 15 dB | 0 dB |
| Eq 8 kHz | Knob | -15 to 15 dB | 0 dB |
| Low Pass | Knob | -18 to 18 dB | 0.8 dB |
| High Pass | Knob | -18 to 18 dB | 5.4 dB |
| Volume | Knob | -120 to 12 dB | 0.1 dB |
| Cabinet Mode | Choice | Cabinet · Bypass | Cabinet |
| Cabinet Type | Choice | SVT 8x10 · SVT 4x10 · B15 1x15 · HRTK 4x10 TW5 | HRTK 4x10 TW5 |
| Mic Type | Choice | DYNAMIC D12 · CARDIOID RE20 · CONDENSER NU47 · DYNAMIC MD421 | CONDENSER NU47 |
| Mic Position | Knob | 0 to 10 | 3.9 |
| Mic Distance | Knob | 0 to 12 | 1.6 |
| Tweeter Position | Knob | 0 to 10 | 2.8 |
| Tweeter Distance | Knob | 0 to 12 | 2.8 |
| Mic Gain | Knob | -120 to 12 dB | -12 dB |
| Tweeter Gain | Knob | -120 to 12 dB | -4.8 dB |
| DI Mode | Choice | PRE · POST | POST |
| DI Low Cut | Knob | 10 Hz to 2 kHz | 451 Hz |
| DI Tone | Knob | -12 to 12 dB | 6.5 dB |
| DI High Cut | Knob | 120 Hz to 22 kHz | 9.26 kHz |
| DI Gain | Knob | -120 to 12 dB | 2.1 dB |
Control names, ranges and defaults are as the block reports them, read from an Anagram on firmware v1.19.2.24 on Nov 13, 2026.
Introduction & Training Videos
Community Reviews
✍️ Join free to write a reviewNo reviews yet for that instrument — be the first!
